Model	CD-100M	CD-10M
Measurement Range	0.10 ~ 10N·m	0.010 ~ 1N·m
Accuracy	±0.5% (199 digits or ± 1 digit)
Display	LCD 4-digit digital display
Measurement Direction	CW-CCW (Clockwise and Counterclockwise)
Measurement Modes	Track / Peak / Peak-Down / C (Real-time data output)
Pass/Fail Judgment	Allows pass/fail judgment within specified range
Max/Min/Avg Values	Displays maximum, minimum, and average values of measurements (up to 30 data points per minute)
	Can measure both CW (tightening direction) and CCW (loosening direction)
	Up to 10 channels, data retention
Real-time Output	Outputs data every approximately 1/180 second of the applied torque
Data Memory	800 measurement data / Statistical data for 10 channels
Data Output	ASCII format (baud rate 19200)
Power	NiCad battery 1.2V × 5 cells (700mAh)
Charge Time / Usage Time	Approx. 3 hours charging / Up to 12 hours continuous usage after full charge
Dimensions	160(W)×125(D)×55(H)
Weight	Approx. 1 kg
Accessories	Measurement joint SJ50/SJ10K	Measurement joint SJ10
	(Hexagon side 6mm bit set of 4)	(Hexagon side 5mm bit set of 4)
	Dedicated charger (Input AC100∼240V 50/60Hz Output DC7.5V)
	Attache case
	Inspection certificate, Calibration certificate, Traceability system diagram

* SJ-50 / SJ-10
- The provided adapter can be used with the conventional coil spring compression method, allowing for conventional management practices.
- Additionally, this adapter is designed with a special structure, eliminating concerns such as disassembly of the adapter due to excessive rewinding.