| 제품 | 제품소개 | 바로가기 |
|---|---|---|
|
Push-pull gauge
|
목록보기 |
DS2 Series
Push-pull gauge
제품 용도
-
제품 특징
1. It is an economical entry-level tensile compression tester that is faithful to basic functions.
2. You can easily check the peak value with a digital display.
3. Designed to be lightweight and portable.
4. Combined with a stand, it can be used as a simple test device.
5. Power-time graphs are available using optional software.
6. It has a four-digit display that is readable and easy to use with four operation buttons.
제품 사양
| Measurement Unit | kgf·N·lbf or kgf·N·ozf interchangeable |
|---|---|
| Accuracy | Allowable error ±0.2% F.S. ±1 digit |
| Measurement Method | Track / Peak mode interchangeable |
| Display | LCD 4-digit display (liquid crystal display) · Units · Battery level, warning |
| Measurement Time | Up to 1000 times/second |
| Display Update | Every 10 seconds |
| Load Measurement | For loads up to 5N: Rated 150% (blinking warning at about 110%) |
| For loads over 20N: Rated 200% (blinking warning at about 110%) | |
| Functions | Display inversion, comparator, sample count change (2 stages) |
| Power | Built-in AAA NiMH rechargeable battery × 4, external AC charging adapter |
| Internal Battery Usage Time | Approximately 10 hours continuous |
| Operating Temperature | 0 to +40℃ |
| Weight | Approximately 420g |
| Output Function | Digital (Serial: RS232C) Mitutoyo SPC output, Analog output (± approximately 1V F.S) |
| Accessories | Attachment 6 types, dedicated AC charging adapter (220V), dedicated storage case |
